Topaz Part Numbers and Ordering Options
Martin Welford
Topaz Part Numbers
Standard Topaz parts are:
- Topaz-LGA-257-064-128-I-HÂ (surface-mount LGA)
- Topaz-SD-257-064-128-I-GÂ (SO-DIMM)
Other variants are available on request and are subject to minimum order quantities.
The generic part number for Topaz is:  Topaz - PP - 25X - RRR - FFF – T – V - C
PP | Module package | LGA: Surface mount |
|---|---|---|
X | i.MX25 CPU variant | 1: i.MX251 (Automotive - no LCD) |
RRR | RAM | 064: 64MBytes |
FFF | NAND Flash size | 128: 128MBytes |
T | Temperature rating | I:- -20 to 85C |
V | Version | Blank: RevC |
C | Customer number | Indicates customer specific software and MAC address information loaded during production. |
Packaging and Standard Order Quantities
Topaz LGA | Topaz SO-DIMM | |
|---|---|---|
Packaging | JEDEC BGA tray | Custom tray |
Standard Pack Quantity | 20pcs | 50pcs |
Samples | Single unit in anti-static bag. | Single unit in anti-static bag |
Customer Software and MAC address Programming
Topaz modules are delivered with a test version of the Windows CE boot-loader programmed. This must be re-programmed during your final production process.
For customers using Windows CE, Topaz modules can be delivered with your software and MAC address programmed. Additional charges for setup and a minimum order quantity of 100pcs applies for this service.
Revision History
LGA
Revision | Changes |
|---|---|
D | Ground pads reduce in size to be the same as all other pads. Solder added to bottom pads. |
SO-DIMM
Revision | Changes |
|---|---|
D | Initial version. |
E | Mounting holes reduce from 3mm to 2.7mm diameter and changed from un-plated to plated. |