ODK Connector Summary
The table below summarizes the connectors and switches found on Opal Development Kit.
Specific details on each connector and signal used can be found by consulting the schematics or other provided documentation.
Designator | Connector | Location |
|---|---|---|
J1 & J2 | Opal Module Connectors | Top |
J3 | USB mini-B for Serial Debug | Top |
J4 | JTAG Connector | Top |
J5 | PMIC Debug Connector (not fitted) | Top |
J6 | VGA DB-15 | Top |
J7 | 7" LCD 40-way FPC Connector | Bottom |
J8 | LVDS 30-way connector | Bottom |
J9 | 7" LCD 4-way touch-screen Connector | Bottom |
J10 | Ethernet RJ-45 Connector | Top |
J11 | 51-way Expansion Connector | Top |
J12 | Xbee Socket | Top |
J13 | Barrel Connector (Power) | Top |
J14 | 0.1" Header (Power – not fitted) | Top |
J15 | 0.1" Header (System Battery – not fitted) | Top |
J16 | LVDS 30-way connector | Bottom |
J17 | SD Card Connector | Bottom |
J18 | Micro-SD Card Connector | Bottom |
J19 | Serial ATA Connector | Top |
J20 | USB Micro-B Connector | Top |
J21 | Dual USB-A Connector | Top |
J22 | Dual USB-A Connector | Top |
J23 | 6-way Push-Wire Connector – Analog In | Top |
J24 | 6-way Push-Wire Connector – Digital Out | Top |
J25 | 6-way Push-Wire Connector – Digital In | Top |
J26 | 6-way Push-Wire Connector – CAN Bus | Top |
J27 | Dual Audio Connector | Top |
S1 | 8-way Boot Configuration Switches | Top |
S2 | 8-way CAN Termination Switches | Top |
SW1 | USER Push-Button 1 | Top |
SW2 | RESET Push-Button | Top |
SW3 | POWER Push-Button | Top |
SW4 | USER Push-Button 2 | Top |