This page tracks changes to the Development Kit hardware.
| Revision | Changes |
|---|
| A | Initial prototype (not released) |
| B | Second Prototype- Bug fixes
- Added PCIe and removed Telit 80-pin interface
- Laird WiFi updated to support MSD45N
|
| C | - Updated input power supply to support 6-28V
- RS232 level UART added on expansion connector
- microSD added
- Laird WiFi removed
- LVDS0 connector changed to mini-HDMI (matches RIoTBoard)
- Added second MIPI connector with full CSI signals for D/Q + MIPI DSI signals (matches Sabre board)
- Added test points for CLK1 and CLK2
- Removed I2C4 to ensure comparability between S/DL & D/Q versions
- Added SATA (D/Q) signals to expansion connector
- Changed 4-port USB hub to 7-port.
- Added 3A 3.3V PSU to power PCIe.
|
| D | - Changed mini-HDMI/LVDS connector to pin header as RIoT board display is end-of-life.
|