Opal-6 Windows Embedded Compact

Windows Embedded Compact (WEC) 7 and 2013 are supported on Opal-6.

The BSP, demo images and documentation are provided and supported by GuruCE

This page on the GuruCE site provides more details on features and support.


The demo images are provided free-of-charge.  This is suitable for the development kit only and a custom image must be created for your specific hardware.

Contact GuruCE for BSP pricing and support options.  

Installation Notes

The GuruCE Getting Started Guide provides detailed instructions on installing WEC into the Opal-6 eMMC flash memory.

There are a couple of things to be aware of with Opal-6 to ensure the process goes smoothly.

Step 2

To put the board into boot mode, change BOOT CONFIG switch 7  to OFF and 8 to ON