The Opal-6 SoM boots using u-boot and supports the following Operating Systems.
...
| Feature | Linux Support | WEC 7 & 2013 Support |
|---|
| Communications Features |
| Ethernet | Yes | Yes |
| USB Host | Yes | Yes |
| USB Function | Yes | | Expand |
|---|
| Configured as mass storage in the demo image. RNDIS and Serial options available in the BSP. |
|
| CAN | Yes | | Expand |
|---|
| One channel configured in the demo image. |
|
| Serial | Yes | Yes |
RS485 (Dev Kit Feature) | | Expand |
|---|
| Simple Tx control support only - i.MX6 hardware address detection is not implemented. |
| | Expand |
|---|
| Simple Tx control support only - i.MX6 hardware address detection is not implemented. |
|
| PCIe | Yes | | Expand |
|---|
| Not included in current demo image. |
|
| Cellular | Yes | No support in demo image |
| WiFi | | Expand |
|---|
| Devices tested include: USB WiFi - ASUS N10 Nano b/g/n PCIe WiFi - Intel 7260 a/b/g/n/ac |
| Under development |
| User Interface Features |
| HDMI | Yes | | Expand |
|---|
| Bootloader has options to specify resolution or use EDID to auto detect. |
|
| LVDS0 | Yes | Yes |
| LVDS1 | Yes | | Expand |
|---|
| Configurable in the bootloader |
|
| MIPI Display | No | No |
| MIPI Camera | | Expand |
|---|
| Tested with Leopard Imaging camera on the Dev Kit. |
| | Expand |
|---|
| Not supported in demo image |
|
| Parallel Camera | | Expand |
|---|
| ADV7180 board coming. Contact us for details. |
| In development. |
| Audio | | Expand |
|---|
| SGTL500 codec supported via I2S |
| Yes |
| Data Storage | |
| SD Card | Yes | Yes |
| eMMC | Yes | Yes |
| Other Features | |
| Real Time Clock | External ST M41T83 RTC support on the Development Kit. Internal i.MX6 RTC has not been tested. | Under development |
| GPIO | Yes | Yes |
