The Opal-6 SoM boots using u-boot and supports the following Operating Systems.  

Click the links above for details on the OS support.

The table below documents the i.MX6 features supported by each OS.  Please ask us if the feature you need is not on the list.

FeatureLinux SupportWEC 7 & 2013 Support
Communications Features 
EthernetYesYes
USB HostYesYes
USB FunctionYes

Configured as mass storage in the demo image.

RNDIS and Serial options available in the BSP.

CANYes

One channel configured in the demo image.

SerialYesYes

RS485

(Dev Kit Feature)

Simple Tx control support only - i.MX6 hardware address detection is not implemented.

Simple Tx control support only - i.MX6 hardware address detection is not implemented.

PCIeYes

Not included in current demo image.

CellularYesNo support in demo image
WiFi
Devices tested include:
USB WiFi - ASUS N10 Nano b/g/n
PCIe WiFi - Intel 7260 a/b/g/n/ac
Under development
User Interface Features
HDMIYes

Bootloader has options to specify resolution or use EDID to auto detect.

LVDS0YesYes
LVDS1Yes

Configurable in the bootloader

MIPI DisplayNoNo
MIPI Camera

Tested with Leopard Imaging camera on the Dev Kit.

Not supported in demo image

Parallel Camera

ADV7180 board coming. Contact us for details.

In development.
Audio

SGTL500 codec supported via I2S

Yes
Data Storage 
SD CardYesYes
eMMCYesYes
Other Features 
Real Time Clock

External ST M41T83 RTC support on the Development Kit.

Internal i.MX6 RTC has not been tested.

Under development
GPIO

Yes

 

Yes