The Opal-6 SoM boots using u-boot and supports the following Operating Systems.
...
The table below documents the i.MX6 features supported by each OS. Please ask us if the feature you need is not on the list.
Feature | Linux Support | WEC 7 & 2013 Support |
---|
Communications Features |
Ethernet | Yes | Yes |
USB Host | Yes | Yes |
USB Function | Yes | Expand |
---|
| Configured as mass storage in the demo image. RNDIS and Serial options available in the BSP. |
|
CAN | Yes | Expand |
---|
| One channel configured in the demo image. |
|
Serial | Yes | Yes |
RS485 (Dev Kit Feature) | Expand |
---|
| Simple Tx control support only - i.MX6 hardware address detection is not implemented. |
|
No Expand |
---|
| Simple Tx control support only - i.MX6 hardware address detection is not implemented. |
|
PCIe |
Under development.Yes | Expand |
---|
| Not included in current demo image. |
|
PCIe/Cellular | Yes | No support in demo image |
Laird WiFi | Under development |
WiFi | Expand |
---|
| Devices tested include: USB WiFi - ASUS N10 Nano b/g/n PCIe WiFi - Intel 7260 a/b/g/n/ac |
| Under development |
User Interface Features |
HDMI | Yes | |
Demo image supports LVDO0 onlyBootloader has options to specify resolution or use EDID to auto detect. |
|
LVDS0 | Yes | Yes |
LVDS1 | Yes | |
Demo image configured as LVDS0Configurable in the bootloader |
|
MIPI Display | No | No |
MIPI Camera | Expand |
---|
| Tested with Leopard Imaging camera on the Dev Kit. |
| Expand |
---|
| Not supported in demo image |
|
Parallel Camera | |
No | There is no camera module currently available for this interface on the Dev Kit. Driver support is in the Linux Kernel. |
No | ADV7180 board coming. Contact us for details. |
| In development. |
Audio | Expand |
---|
| SGTL500 codec supported via I2S |
| Yes |
Data Storage | |
SD Card | Yes | Yes |
eMMC | Yes | Yes |
Other Features | |
Real Time Clock | External ST M41T83 RTC support on the Development Kit. Internal i.MX6 RTC has not been tested. | Under development |
GPIO | Yes | Yes |