The Opal-6 SoM boots using u-boot and supports the following Operating Systems.
Click the links above for details on the OS support.
The table below documents the i.MX6 features supported by each OS. Please ask us if the feature you need is not on the list.
| Feature | Linux Support | WEC 7 & 2013 Support | |
|---|---|---|---|
| User Interface Features | |||
| HDMI | Yes | No | |
| LVDS0 | Yes | Yes | |
| LVDS1 | Yes | No | |
| MIPI Display | No | No | |
| MIPI Camera |
| No | |
| Parallel Camera |
| No | |
| Audio |
| Yes | |
| Data Storage | |||
| SD Card | Yes | Yes | |
| eMMC | Yes | Yes | |
| Communications Features | |||
| Ethernet | Yes | Yes | |
| USB Host | Yes | Yes | |
| USB Function | Yes | Yes (configured as mass storage) | |
| CAN | Yes | Yes (single channel configured in the demo image) | |
| Serial | Yes | Yes | |
RS485 (Dev Kit Feature) | Yes. Simple Tx control support only - i.MX6 hardware address detection is not implemented. | No | |
| PCIe | Under development. | Supported in BSP but not demo image | |
| PCIe/Cellular | Yes | No support in demo image | |
| Laird WiFi | Under development | Under development | |
| Other Features | |||
| Real Time Clock | External ST M41T83 RTC support on the Development Kit. Internal i.MX6 RTC has not been tested. | No | |
| GPIO | Yes
| Yes | |