Versions Compared
compared with
Key
- This line was added.
- This line was removed.
- Formatting was changed.
Comment:
Migrated to Confluence 5.3
Overview
Two HiRose FX10A-168P-SV1(71) connectors are required to interface Opal to a base-board.
Opal has two 2.7mm (0.106") mounting holes size to 2.7mm. Use plastic screws or washers and ensure the screw head has a maximum size of 5mm (0.197").
The dimensions on the following diagram are in mm. Click the image for a larger view.
Connector PCB Footprint
The following diagram is taken from the FX10A data sheet.
A | 41.5mm |
---|---|
C | 44.4mm |
D | 49.5mm |
E | 46.3mm |
Insert excerpt | ||||||
---|---|---|---|---|---|---|
|
Stacking Height
The total height of the Opal module when connected to a base-board is 9mm including both connectors.
Panel | ||
---|---|---|
| ||
|