...
For a full description of capabilities and details of registers, please refer to the Freescale i.MX25 Reference Manual.
Where you see Pad/Pin in the following tables, this refers to:
|
| Anchor | ||||
|---|---|---|---|---|
|
...
The following signals are used by the standard LCD controller.
Pad/Pin | Voltage | Signal Name | Description | Notes |
|---|---|---|---|---|
E2/50 | 3.3V | CONTRAST | Contrast output |
|
L1/25 | 3.3V | LD0 | Data signal |
|
L2/26 | 3.3V | LD1 | Data signal |
|
L3/27 | 3.3V | LD2 | Data signal |
|
K1/28 | 3.3V | LD3 | Data signal |
|
K2/29 | 3.3V | LD4 | Data signal |
|
K3/30 | 3.3V | LD5 | Data signal |
|
J1/31 | 3.3V | LD6 | Data signal |
|
J2/32 | 3.3V | LD7 | Data signal |
|
J3/33 | 3.3V | LD8 | Data signal |
|
H1/34 | 3.3V | LD9 | Data signal |
|
H2/35 | 3.3V | LD10 | Data signal |
|
H3/36 | 3.3V | LD11 | Data signal |
|
G1/37 | 3.3V | LD12 | Data signal |
|
G2/38 | 3.3V | LD13 | Data signal |
|
G3/39 | 3.3V | LD14 | Data signal |
|
F1/40 | 3.3V | LD15 | Data signal |
|
F2/49 | 3.3V | LSCLK | Pixel Clock |
|
F3/51 | 3.3V | OE_ACD | Output enable |
|
K4/53 | 3.3V | VSYNC | Vertical Sync |
|
L4/52 | 3.3V | HSYNC | Horizontal Sync |
|
U1/164 | 3.3V | LD16 | Data Signal | Also on B3 (3.3V) and A12 (1.8V) |
Y8/165 | 3.3V | LD17 | Data Signal | Also on A11 (1.8V) |
A13/193 | 1.8V | LD18 | Data Signal | Voltage level converter required |
A14/194 | 1.8V | LD19 | Data Signal | Voltage level converter required |
A15/195 | 1.8V | LD20 | Data Signal | Voltage level converter required |
A16/196 | 1.8V | LD21 | Data Signal | Voltage level converter required |
F16/197 | 1.8V | LD22 | Data Signal | Voltage level converter required |
F15/198 | 1.8V | LD23 | Data Signal | Voltage level converter required |
C1/8 | 3.3V | CLS | Special timing signal for Sharp TFT |
|
C2/9 | 3.3V | SPL | Special timing signal for Sharp TFT |
|
D2/10 | 3.3V | PS | Special timing signal for Sharp TFT |
|
D1/11 | 3.3V | REV | Special timing signal for Sharp TFT |
|
The following signals are used by the Smart LCD controller (SLCD)
Pad/Pin | Voltage | Signal Name | Description | Notes |
|---|---|---|---|---|
E2/50 | 3.3V | CONTRAST | Contrast output |
|
L1/25 | 3.3V | DATA_0 | Data signal |
|
L2/26 | 3.3V | DATA_1 | Data signal |
|
L3/27 | 3.3V | DATA_2 | Data signal |
|
K1/28 | 3.3V | DATA_3 | Data signal |
|
K2/29 | 3.3V | DATA_4 | Data signal |
|
K3/30 | 3.3V | DATA_5 | Data signal |
|
J1/31 | 3.3V | DATA_6 | Data signal |
|
J2/32 | 3.3V | DATA_7 | Data signal |
|
J3/33 | 3.3V | DATA_8 | Data signal |
|
H1/34 | 3.3V | DATA_9 | Data signal |
|
H2/35 | 3.3V | DATA_10 | Data signal |
|
H3/36 | 3.3V | DATA_11 | Data signal |
|
G1/37 | 3.3V | DATA_12 | Data signal |
|
G2/38 | 3.3V | DATA_13 | Data signal |
|
G3/39 | 3.3V | DATA_14 | Data signal |
|
F1/40 | 3.3V | DATA_15 | Data signal |
|
F2/49 | 3.3V | LCD_CS | Used as a chip select for external display controller in serial mode. In parallel mode, used as write strobe for the external display controller. This signal polarity is programmable. |
|
F3/51 | 3.3V | LCD_RS | LCD Register Select signal that indicates to the LCD device whether data being written is display data or control data. This signal polarity is programmable. |
|
| Anchor | ||||
|---|---|---|---|---|
|
...
Pad/Pin | Voltage | Signal Name | Description | Notes |
|---|---|---|---|---|
AUD3 |
|
|
|
|
J3/33 | 3.3V | TXD | Transmit data |
|
H1/34 | 3.3V | RXD | Receive data |
|
H2/35 | 3.3V | TXC | Transmit clock |
|
G3/39 | 3.3V | RXC | Receive clock |
|
H3/36 | 3.3V | TXFS | Transmit frame |
|
F1/40 | 3.3V | RXFS | Receive frame |
|
AUD4 |
|
|
|
|
G18/178 | 1.8V | TXD | Transmit data |
|
M15/179 | 1.8V | RXD | Receive data |
|
N14/180 | 1.8V | TXC | Transmit clock |
|
|
| RXC | Receive clock | Not present on the Topaz interface |
H19/187 | 1.8V | TXFS | Transmit frame |
|
H18/184 | 1.8V | RXFS | Receive frame |
|
AUD5 |
|
|
|
|
A9/87 | 3.3V | TXD | Transmit data |
|
B8/88 | 3.3V | RXD | Receive data |
|
B7/89 | 3.3V | TXC | Transmit clock |
|
A7/85 | 3.3V | RXC | Receive clock |
|
B6/90 | 3.3V | TXFS | Transmit frame |
|
A6/86 | 3.3V | RXFS | Receive frame |
|
AUD6 |
|
|
|
|
V14/111 | 3.3V | TXD | Transmit data |
|
Y15/110 | 3.3V | RXD | Receive data |
|
V16/109 | 3.3V | TXC | Transmit clock |
|
V17/107 | 3.3V | RXC | Receive clock |
|
V15/112 | 3.3V | TXFS | Transmit frame |
|
Y16/108 | 3.3V | RXFS | Receive frame |
|
AUD7 |
|
|
|
|
U1/164 | 3.3V | TXD | Transmit data |
|
T16/94 | 3.3V | RXD | Receive data | Also on V2 |
Y8/165 | 3.3V | TXC | Transmit clock |
|
R16/95 | 3.3V | RXC | Receive clock |
|
U16/93 | 3.3V | TXFS | Transmit frame |
|
P16/96 | 3.3V | RXFS | Receive frame |
|
| Anchor | ||||
|---|---|---|---|---|
|
...
Pad/Pin | Voltage | Signal Name | Description | Notes |
|---|---|---|---|---|
V14/111 | 3.3V | MCLK | Sensor Master Clock |
|
V15/112 | 3.3V | PIXCLK | Pixel Clock |
|
Y15/110 | 3.3V | VSYNC | Vertical Sync (Start Of Frame) |
|
V16/109 | 3.3V | HSYNC | Horizontal Sync ( Blank Signal) |
|
V19/101 | 3.3V | D2 | Data signal |
|
U19/102 | 3.3V | D3 | Data signal |
|
T19/103 | 3.3V | D4 | Data signal |
|
Y18/104 | 3.3V | D5 | Data signal |
|
V18/105 | 3.3V | D6 | Data signal |
|
Y17/106 | 3.3V | D7 | Data signal |
|
V17/107 | 3.3V | D8 | Data signal |
|
Y16/108 | 3.3V | D9 | Data signal |
|
D2/10 | 3.3V | D0 | Data signal | Also on L1 |
D1/11 | 3.3V | D1 | Data signal | Also on L2 |
J2/32 | 3.3V | D10 | Data signal |
|
J1/31 | 3.3V | D11 | Data signal |
|
K3/30 | 3.3V | D12 | Data signal |
|
K2/29 | 3.3V | D13 | Data signal |
|
K1/28 | 3.3V | D14 | Data signal |
|
L3/27 | 3.3V | D15 | Data signal |
|
| Anchor | ||||
|---|---|---|---|---|
|
...
Pad/Pin | Voltage | Signal Name | Description | Notes |
|---|---|---|---|---|
EPIT1 |
|
|
|
|
Y8/165 | 3.3V | EPITO | Output pin for indication of occurrence of output compare event through a specified transition. | Also on Y6 |
EPIT2 |
|
|
|
|
J4/14 | 3.3V | EPITO | Output pin for indication of occurrence of output compare event through a specified transition. |
|
| Anchor | ||||
|---|---|---|---|---|
|
...
Pad/Pin | Voltage | Signal Name | Description | Notes |
|---|---|---|---|---|
M3/74 | 3.3V | LINE | 1-wire signal |
|
| Anchor | ||||
|---|---|---|---|---|
|
...
Pad/Pin | Voltage | Signal Name | Description | Notes |
|---|---|---|---|---|
E2/50 | 3.3V | WDOG_B | This signal powers down the module. Refer to the i.MX25 Reference Manual for further detail. | Also on U2 |
| Anchor | ||||
|---|---|---|---|---|
|
...