Opal-6 Linux - 4.1.15-001

Release4.1.15-001 BETA
Linux Version4.1.15
YOCTO
Version 
2.0.1 (Jethro)

u-boot
Version 

2015.01
Release Date2016-05-11
Supported Platforms

Opal-6 rev A (DualLite)

Opal-6 rev C (Quad and DualLite)

Opal-6 IoT Development Kit rev A and B

 

Downloads and Links

Demo Binaries

Demo binaries are provided along with the NXP Manufacturing Tool. This is a Windows application.

To install:

  1. Unzip the package
  2. Put the BOOT CONFIG jumpers on the Developmet Kit into USB mode
  3. Attach a USB cable to the i.MX6 USB port
  4. Power on the Development KIt
  5. Run the MfgTool application and follow the instructions
  6. When MfgTool is finished, close it and power down the Development Kit
  7. Switch BOOT CONFIG back to eMMC and power on
Pre-Built Toolchain

This pre-built toolchain includes tools and libraries for application development on our demo images.

Opal-6 Yocto Layer

Contact us for access

Linux Kernel SourceContact us for access
u-boot SourceContact us for access

 

Release Notes

This is an interim release for Linux 4.1.15 on Opal-6.  

Key features are:

  1. New Linux v4 kernel 
  2. Support for the QUAD SoM 

A full release will follow in June.

Known Issues

  • XFCE image includes polkit error on startup
  • Rev B development kits require modification to support Opal-6 QUAD SoMs