Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This table details the connectors on the Quartz Development Kit and where they can be found.

The information relates to the latest revision of the board.

DesignatorDescriptionLocation
J1,J2Interface connectors for the Quartz CPU ModuleTop
J3USB mini-B. Interface to K20 for CMSIS-DAP debugTop
J440-way FFC connector for 7" TFT LCD interfaceBottom
J530-way connector for the LVDS display interfaceBottom
J64-way FFC connecfor for the resistive touch screenBottom
J7RJ - 45 connector for Ethernet 0 interfaceTop
J8RJ - 45 connector for Ethernet 1 interfaceTop
J9USB mini-B for Serial debug on SCI2Top
J10Push-wire connector for CANTop
J11Push-wire connector for Digital and Analog OutputsTop
J12Push-wire connector for Digital and Analog InputsTop
J132.1mm barrel connector for main power in (+5V)Top
J142-way 0.1" header for alternate +5V power inputTop
J15, J17USB HostTop
J16USB mini-B for Vybrid USB Function interfaceTop
J18SD cardBottom
J1951-way expansionTop
J20DB-9 DB9 for serial interface on SCI0Top
J21, J22RCA composite video input connectorsTop
J23JTAG for K20 microcontroller. Standard ARM 9-pin configurationTop
J24JTAG for Vybrid. Standard ARM 9-pin configurationTop
J273.5mm stereo jack for audio outTop
S18-way DIP switch for boot configuration and CAN termination setupTop
SW1, SW2Push button switches for user applicationTop
SW3Push button for RESETTop
E14-way capacitive touch buttons for user applicationTop
BT1Battery connector for backup coin-cellBottom