Page Comparison

This table details the connectors on the Quartz Development Kit and where they can be found.

The information relates to the latest revision of the board.

Designator	Description	Location
J1,J2	Interface connectors for the Quartz CPU Module	Top
J3	USB mini-B. Interface to K20 for CMSIS-DAP debug	Top
J4	40-way FFC connector for 7" TFT LCD interface	Bottom
J5	30-way connector for the LVDS display interface	Bottom
J6	4-way FFC connecfor for the resistive touch screen	Bottom
J7	RJ-45 connector for Ethernet 0 interface	Top
J8	RJ-45 connector for Ethernet 1 interface	Top
J9	USB mini-B for Serial debug on SCI2	Top
J10	Push-wire connector for CAN	Top
J11	Push-wire connector for Digital and Analog Outputs	Top
J12	Push-wire connector for Digital and Analog Inputs	Top







		J13	2.1mm barrel connector for main power in (+5V)	Top
J14	2-way 0.1" header for alternate +5V power input	Top
J15, J17	USB Host	Top
J16	USB mini-B for Vybrid USB Function interface	Top
J18	SD card	Bottom
J19	51-way expansion	Top
J20	DB-9 for serial interface on SCI0	Top
J21, J22	RCA composite video input connectors	Top
J23	JTAG for K20 microcontroller. Standard ARM 9-pin configuration	Top
J24	JTAG for Vybrid. Standard ARM 9-pin configuration	Top
J27	3.5mm stereo jack for audio out	Top
S1	8-way DIP switch for boot configuration and CAN termination setup	Top
SW1, SW2	Push button switches for user application	Top
SW3	Push button for RESET	Top
E1	4-way capacitive touch buttons for user application	Top
BT1	Battery connector for backup coin-cell	Bottom

Versions Compared